Reach Truck Training
Counterbalance forklift trucks are arguably the most commonly used types of forklift in warehousing applications. Their appearance is synonymous with forklifts, with typically 2 or 3 axles and front-facing forks.
Counterbalance forklifts are versatile machines which have front-facing forks and a rear-steering axle; making them highly manoeuvrable. They have a rigid mast on the front of the machine from which the forks extend.
About Reach Forklift Trucks
Reach forklift trucks are specifically designed for warehousing applications. Their appearance is not dissimilar to a counterbalance forklift, in the sense that is has forks; but a reach forklift has forks that extend from the side of the vehicle.
Reach forklifts were designed to improve efficiency in warehouse environments where the aisle width can be quite narrow. The forks on a reach forklift truck actually extend out from the truck to enable them to pick up items from racking systems. These forks then retract and the truck leaves the aisle side-on.
Mon-Fri | 08.30am - 16.30pm
Reach truck training courses are designed for candidates who require novice training, semi-experienced training, or simply refresher courses. Reach forklift trucks should be operated in line with PUWER regs, and adequate training should be given in the safe operation of the reach truck.
A typical reach truck training course covers:
- Health and Safety At Work Act 1974
- (PUWER) Provision and Use of Work Equipment Regulations
- (LOLER) Lifting Operations and Lifting Equipment Regulations
- Different types of reach forklift trucks
- Basic construction
- Purpose and use of all controls
- How to comply with manufacturer instructions in accordance with the operator’s
- Checking the reach forklift truck is serviceable and stable for safe operation prior to use
- Pre-start and operational checks
- Checking that safety devices are functioning as per operational specification
- Operating the machine on level ground and slopes.
- Changing forks
- Lift carrying and placing loads
- Stacking a load to a minimum 3m high
- Loading a simulated lorry
- How to stack and de-stack from the racking system
- How to manoeuvre the machine through a confined area
- How to recognise and respond to given instructions
- Keeping within safe working parameters of the reach forklift truck and other machines in the area
- How to place the reach forklift truck in an out-of-service condition, to isolate and secure the machine
- The limitations of use when using the reach forklift truck
On completion of a reach truck training course; candidates will be able to:
- Demonstrate a good understanding of the regulations that apply to the safe use of reach forklift truck
- Carry out a full pre-start/shift check on the reach forklift truck and record their findings
- Carry out a full operational check on the reach forklift truck and record their findings
- Operate the reach forklift truck in line with the manufacturer’s instructions/manual
- Correctly and safely manoeuvre the machine in the confined area
- Safely ascend and descend slopes
- Transport load at a speed consistent with the load and general site conditions
- Stack and de-stack loads correctly and safely
- Load and offload simulated lorry safely and efficiently
- Load and offload from a racking system efficiently.
- Keep within safe working parameters of the reach forklift truck
- Place the reach forklift truck in an out-of-service condition, to isolate and secure
- Understand the limitations of use when operating the reach forklift truck
- Report any problems or defects
A reach truck training course covers the following legislation:
Health and Safety At Work Act 1974
(PUWER) Provision and Use of Work Equipment Regulations
(LOLER) Lifting Operations and Lifting Equipment Regulations
Rider-operated lift trucks Approved Code of Practice
Specific types of Forklift Training we offer
Flexi & Bendi Forklift Training
Counterbalance Forklift Training
Reach Truck Training
Accredited Forklift Training
Forklift training can be completed in line with a number of accreditations.
We can offer RTITB NORS training which will entitle the candidate to certificates and ID cards that bear the RTITB logo. Additionally, we can offer counterbalance forklift training under CPCS and NPORS where required.
See more information below: