Side Loader Training
The middle 19th century through the early 20th century saw the development that led to today’s modern side loaders. The forerunners of the modern side loaders were manually powered hoists that were used to lift loads.
Continuing development was encouraged by expanded use of the side loader and continued through the 1920s and 1930s. This led to the development of the first hydraulic power electric power forklift trucks.
Side Loader Training
Industrial Training Services offer side loader training courses for novices and semi-experienced candidates.
RTITB recommend a 5-day course for novices. Semi-experienced side loader operators’ training duration will vary depending on experience level.
Refresher training courses are for operatives looking to renew their certification to operate a side loader.
We recommend RTITB side loader training. This is the most widely accepted and recognised training scheme in the warehouse and distribution industry; offering the operator better work opportunities. NPORS side loader training is accepted on some construction sites, however, at present we would recommend RTITB side loader training for warehouse and distribution workers.
Our side loader training is for side loaders of all sizes. Training prepares the operator for both the theory and practical test. Operators that achieve the required standards will be awarded a certificate of basic training for the side loader category.
Course Content
Industrial Training Services side loader training courses cover the following content:
- Health and Safety At Work Act 1974
- (PUWER) Provision and Use of Work Equipment Regulations
- (LOLER) Lifting Operations and Lifting Equipment Regulations
- Different types of side loader
- basic construction
- components
- the purpose and use of all controls
- How to comply with manufacturer instructions in accordance with the operator’s handbook
- Checking the side loader is serviceable and stable for safe operation prior to use
- Pre-start and operational checks
- How to check that safety devices are functioning as per operational specification
- How to drive and manoeuvre machine on level ground and slopes
- How to lift carry and place loads
- Loading a simulated lorry
- Stacking and de-stacking from a racking system
- How to manoeuvre the machine through a confined area
- How to recognise and respond to given instructions
- How to keep within safe working parameters of the side loader and other machines in the area
- How to place the side loader in an out-of-service condition to isolate and secure the machine
- Limitations of use when using the side loader
The side loader training course provides the candidate’s with the skills and knowledge they require to successfully achieve the standards the side loader all sizes test requires.
Course Outcome
On completion of a side loader training course; the operative will be able to:
- Demonstrate a good understanding of the regulations that apply to the safe use of side loader
- Carry out a full pre-start/shift check on the side loader and record their findings
- Carry out a full operational check on the side loader and record their findings
- Operate the side loader in line with the manufacturer instructions/manual
- Correctly and safely manoeuvre the machine in the confined area
- Safely ascend and descend slopes
- Transport load at a speed consistent with the load and general site conditions
- Stack and de-stack loads correctly and safely
- Load and offload simulated lorry safely and efficiently
- Load and offload from a racking system efficiently
- Keep within safe working parameters of the side loader
- Place the side loader in an out-of-service condition, to isolate and secure
- Understand the limitations of use when operating the side loader
- Report any problems or defects
At the end of the side loader training course, the candidate should be able to achieve the required standards of the RTITB theory and practical test.
Delegates
Side loader training is applicable to novice and semi-experienced candidates that operator the side loader. Refresher courses are recommended to be taken every 3-5 years by HSE and RTITB.
Legality
Industrial Training Services side loader training courses cover the following legislation:
Health and Safety At Work Act 1974
(PUWER) Provision and Use of Work Equipment Regulations
(LOLER) Lifting Operations and Lifting Equipment Regulations
Rider-operated lift trucks, Approved Code of Practice
Operators, supervisors and managers will have a good understanding of the regulations that apply to the safe operation and use of the type of side loader for which they are trained, as well as inspections and the need to keep a record of the checks carried out by the operator and how to operate the side loader as per the manufacturer recommendations.